SRS ECO

The aluminium roller shutter mod. ECO is assembled with profiles H30 or H38, is realized in the required heights in extruded shapes and special characteristics. The shutter can be used for little and medium compartments, in substitution to the troublesome leaf-doors. Usually the roller shutters are delivered silver anodized or RAL 7035 painted, or on demand painted in different RAL colours.

The sliding system of these shutters permits to make good use of the available space inside the vehicle. When open the shutter will lay flat horizontally under the roof and the eventual surplus length will lay vertically in the rear part.This sliding system is recommended for areas of max. 1m2. It is a cheap and easy mounting solution, which anyway maintains the reliability and design standards of all SRS shutters.

USEFUL AREA
Max. reccomended area 1 m²

The roller shutter will be delivered divided into parts, which can be easy assembled:

  • 1 pre-assembled shutter complete with closing end with or without key
  • 1 pair of vertical guides
  • 2 pairs of curves (entire or separate)
  • 2 eventual sliding extensions, to be put between the curves, when the curves are separate
  • 1 box with accessories
  • + required optionals
Technical sheet
Commercial information
Pdf order sheet